Modern Block Plane Replacement Blades - CPM MagnaCut
Experience peak performance with our CPM MagnaCut handplane blades, you'll sharpen a lot less, guaranteed.
-
CPM MagnaCut: high performance blade steel with ideal characteristics
-
Ultra-fine grain structure, including extra hard Vanadium and Niobium carbides for maximum wear resistance: hones to an exceedingly sharp edge. You'll sharpen less often and your blade will just keep cutting when others dull or chip
-
Double tempered and cryogenically treated to Rockwell C 62 hardness
-
Unparalleled corrosion resistance
- LB1 Block Plane Blade is compatible with Lie-Nielsen™ No. 60-1/2 Block Plane (1/8" thick) (rendering shown)
- LB2 Block Plane Blade is compatible with Lie-Nielsen™ No. 102 Block Plane (1/8" thick) (rendering shown)
- LB3 Block Plane Blade is compatible with Lie-Nielsen™ No. 101 Violin Maker's Block Plane (1/8" thick) (rendering shown)
- LB4 Block Plane Blade is compatible with Lie-Nielsen™ No. 100 Model Maker's Block Plane (1/8" thick) (rendering shown)
- VB1 Block Plane Blade is compatible with Veritas™ DX60 Block Plane (1/8" thick)
- VB2 Block Plane Blade is compatible with Veritas™ Apron Block Plane (1/8" thick)
-
VB3 Block Plane Blade is compatible with Veritas™ Pocket Block Plane (1/8" thick, .84" wide) (rendering shown
-
VB4 Block Plane Blade is compatible with Veritas™ Standard and Low Angle Block Plane (1/8" thick, 1-5/8" wide) (rendering shown)
-
VB5 Blade is compatible with Veritas™ Iron Edge Trimming Plane (1/8" thick, approx. 1-1/4" wide) (rendering shown)
-
SWB Block Plane Blade is compatible with modern Stanley Sweetheart® No. 60-1/2 and 9-1/2 Block Planes built since 2009, will not fit older models or standard Stanley Block planes (1/8" thick) (rendering shown)
Sharpening Note: CPM MagnaCut uses Vanadium and Niobium carbides for extreme wear resistance, standard aluminum oxide abrasives aren't as effective as harder abrasives; Diamond and CBN abrasives work best.
30 day risk free guarantee on CPM MagnaCut blades.
Regular price $ 67.99
Unit price per
Testimonials
“Hi Nick, The plane blades arrived today, and just wanted to say how happy I am with them. It has been well worth the wait! The blades are also the flattest I've ever experienced. Almost no effort to get the back polished and the edge sharp. The care and attention to detail really shows. The blades take on a great edge and take beautiful fine shavings - and I'm looking forward to having to sharpen less :-) Thanks again!”
John G.
New Zealand
“Nick is the wood-machining genius behind Lake Erie Toolworks, which makes stunning wooden-thread vises. I have installed dozens of his vises on benches and have one on my Roubo. Nick’s wooden screws are the best – better than even the best vintage screws I’ve encountered.”
Christopher Schwarz
https://www.popularwoodworking.com/editors-blog/not-just-another-moxon-vise/
“Howdy. Love the blade I picked up a couple months ago. Best on the market, that’s no BS. I don’t think I’ve used a different blade in my 51 since getting one. When it dulls I sharpen it on the spot over swapping in an A2 because they chip/leave marks on end grain so quickly. It’s crazy how much better these hold an edge.”
Patrick B.
“I'm really enjoying the replacement blade that you sent for my L.N. 102. It cut cherry end grain beautifully. I shall be ordering about 7 or so replacement bench plane blades from your company soon.”
Chris M.
"I don't think it would be physically possible to do cleaner work than what Nick has pulled off. These screws are a work of craftsmanship of the highest order."
Jameel Abraham
“I have received the screws and they are awesome!!! I spend most of my time just winding them in and out.”
Ryan B.
Australia