2X Bench Builders Bundle
Regular price $ 689.99
Unit price per
Description:
If you are looking for a complete wooden vise package to power all of your workholding needs for your robust workbench, then our 2X Bench Builders Bundle is just the ticket. This kit contains a "2X" Premium Wooden Vise Kit for use as your monster leg vise and also a Premium Wagon Vise Kit for use as your wagon/tail vise.
Details:
2X Bench Builders Bundle - includes:
One - 2X Wood Vise Screw - Single Kit Premium - which includes:
>> One 2X hard maple wood vise screw
- Double start thread, 1 TPI (2 Threads per inch but 1 turn per inch of movement)
- Vise Screw is milled from a solid billet of hard maple, no glue joints
- Total Length approx: 23" to 24"
- Hub approx.size: 4" diameter x 4-3/4" long
- Robust threaded section approx. size: 3" diameter x 19 long, 2" next to hub is unthreaded
>> One 2X hard maple wood nut
- Approx.size: 2-3/4" thick x 5" wide x 8-9" long
>> One hard maple wood handle - end grain threaded knobs on both ends
- Approx. Size 1" diameter handle x 1-3/4" diameter knobs x 16-3/4" length
- Two hard maple end grain threaded knobs - approx size 1-3/4" x 1-7/8"
- Two rubber O-Rings for use with wood handle and knobs
>>One external 2X brass garter set with steel screw kit
- Your choice of either our aged "Vintage Finish" or our "Brushed Finish" garter set
One - Wood Wagon Vise Screw - Premium Kit - which includes:
>> One hard maple wood wagon vise screw
- Total Length approx: 16"
- Hub approx.size: 3-1/2" diameter x 4" long
- Threaded section approx.size: 2-1/2" diameter x 11" long
- Allows for approximately 8" of travel for the vise capacity
- Vise Screw is milled from a solid billet of hard maple, no glue joints to fail
>> One hard maple Extended wood nut (Option for Standard Type Nut)
- Extended Nut - Eliminates need to build up Wagon Vise end cap prior to installation
- Counterbored outside face of tapped hole so the vise can screw in closer to bench top
- Approx.size 2-3/4" thick x 4" wide x 26"-28" long
- Standard Nut Option - Requires build up of Wagon Vise end cap prior to installation
- Approx.size: 2-3/4" thick x 4" wide x 8-9" long
>> One Brass Connector Plate with steel screw kit
- Brass Plate includes your choice of either our aged "Vintage Finish" or our "Brushed Finish"
>> One Shoulder Bolt and Anchor
- Also includes a slotted shim for proper Bench Anchor installation
>> One hard maple wood handle - end grain threaded knobs on both ends
- Approx. Size 1" diameter handle x 1-3/4" diameter knobs x 16-3/4" length
- Two hard maple end grain threaded knobs - approx size 1-3/4" x 1-7/8"
- Two rubber O-Rings for use with wood handle and knobs
>>Wagon vise screw installation package includes:
- 2 Maple Runners - Pre-slotted & counterbored for easy install
- Runners include lag screws and washers
- 2 UHMW (Ultra High Molecular Weight) Plastic Sliders - Pre-drilled
- Sliders include stainless steel screw kit
- 4 - Six inch SPAX x 1/2" Lag Bolts
- 2 - Five inch x 1/2" Lag Bolts
(Leadtime: Ships within approximately 8-10 weeks)