Bench Builders Bundle

Regular price $ 619.99

Unit price per 

Wood Nut Style

Brass Connector Plate Finish

only -30 left in stock

Description:
If you are looking for a complete wooden vise package to power all of your workholding needs, our Bench Builders Bundle is just the ticket.  This kit contains a premium wooden vise kit for use as your leg vise and also a premium wagon vise kit for use as your wagon/tail vise.

Details:
Bench Builders Bundle  - includes:

One - Wood Vise Screw - Single Kit Premium - which includes:

>> One hard maple wood vise screw
  • Total Length approx: 23" to 24"
  • Hub approx.size: 3-1/2" diameter x 4-3/4" long
  • Threaded section approx.size: 2-1/2" diameter x 19-1/4" long
  • 2 Turns Per Inch vise screw movement
  • Vise Screw is milled from a solid billet of hard maple, no glue joints
>> One hard maple wood nut
  • Approx.size: 2-3/4" thick x 4" wide x 8-9" long
>> One hard maple wood handle - end grain threaded knobs on both ends
  • Approx. Size 1" diameter handle x 1-3/4" diameter knobs x 16-3/4" length
  • Two hard maple end grain threaded knobs - approx size 1-3/4" x 1-7/8"
  • Two rubber O-Rings for use with wood handle and knobs
>> One external brass garter set with steel screw kit - Your choice of either our aged "Vintage Finish" or our  "Brushed Finish" garter



One - Wood Wagon Vise Screw - Premium Kit - which includes:
>> One hard maple wood wagon vise screw
  • Total Length approx: 16"
  • Hub approx.size: 3-1/2" diameter x 4" long
  • Threaded section approx.size: 2-1/2" diameter x 11" long
  • 2 Turns Per Inch vise screw movement
  • Allows for approximately 8" of travel for the vise capacity
  • Vise Screw is milled from a solid billet of hard maple, no glue joints to fail
 >> One hard maple Extended wood nut (Option for Standard Type Nut)
  • Extended Nut - Eliminates need to build up Wagon Vise end cap prior to installation
  • Counterbored outside face of tapped hole so the vise can screw in closer to bench top
  • Approx.size 2-3/4" thick x 4" wide x 26"-28" long
  • Standard Nut Option - Requires build up of Wagon Vise end cap prior to installation
  • Approx.size: 2-3/4" thick x 4" wide x 8-9" long
 >> One Brass Connector Plate with steel screw kit   
  • Brass Plate includes your choice of either our aged "Vintage Finish" or our "Brushed Finish"
 >> One Shoulder Bolt and Anchor
  • Also includes a slotted shim for proper Bench Anchor installation
>> One hard maple wood handle - end grain threaded knobs on both ends
  • Approx. Size 1" diameter handle x 1-3/4" diameter knobs x 16-3/4" length
  • Two hard maple end grain threaded knobs - approx size 1-3/4" x 1-7/8"
  • Two rubber O-Rings for use with wood handle and knobs
>>Wagon vise screw installation package includes: 
  • 2 Maple Runners - Pre-slotted & counterbored for easy install
  • Runners include lag screws and washers
  • 2 UHMW (Ultra High Molecular Weight) Plastic Sliders - Pre-drilled
  • Sliders include stainless steel screw kit
  • 4 - Six inch SPAX x 1/2" Lag Bolts
  • 2 - Five inch x 1/2" Lag Bolts

Note on leadtimes: the current leadtime listed means that orders placed today are expected to ship within that amount of time.  It doesn't guarantee items will be in stock and ready to ship at that time in the future for orders placed then.  In other words, you may be waiting indefinitely if you wait to place an order until the leadtime is lasted as 'In stock, ready to ship'.  My goal is to have all standard products ready to ship but currently many of them are being built to order.

(Leadtime: Ships in approx. 6-8 weeks)

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.

Search

Shopping Cart

Your cart is currently empty.
Shop now