.product-single__photos--loading::before { display: none; } .product-single__photo--loading { position: relative; }

Vise, Vice, Wood Vise, Leg Vise, Tail Vise, Face Vise, Leg Vice, Lake Erie Toolworks, Workbench

2X Wood Vise - Basic Kit

Description:

If you want a large, robust and ultra fast wooden vise to power your workbench workholding for leg, twin-screw, face or tail vises, then look no further. The "2X" wooden vise is simply the largest and fastest threaded woodworking vise in the world today.

Our "2X" wood vise screw has a double start thread that provides a 1 turn per inch vise screw movement (1TPI) - therefore, you would turn the handle one complete revolution and the screw will advance or retract 1" (25.4 mm). This is twice as fast as our normal wood vise screw.

Details:

2X Wood Vise Screw Kit: (Used for) - Leg Vises - Twin Screw Vises - Face Vises - Tail Vises

2X Wood Vise Screw - Single Kit Basic - includes:

>> One 2X hard maple wood vise screw

Double start thread, 1 TPI (2 Threads per inch but 1 turn per inch of movement)
Vise Screw is milled from a solid billet of hard maple, no glue joints
Total Vise Screw Length approx: 23" to 24"
Hub approx.size: 4" diameter x 4-3/4" long
Robust threaded section approx. size: 3" diameter x 19" long, 2" next to hub is unthreaded

>> One 2X hard maple wood nut

Approx.size: 2-3/4" thick x 5" wide x 8-9" long

(Note: Only one vise is included with this kit as "2X" refers to the name of this product and does not mean that there are two vises included in this kit.)

Regular price $ 275.00

Unit price per

Quantity

Testimonials

“Hi Nick, The plane blades arrived today, and just wanted to say how happy I am with them. It has been well worth the wait! The blades are also the flattest I've ever experienced. Almost no effort to get the back polished and the edge sharp. The care and attention to detail really shows. The blades take on a great edge and take beautiful fine shavings - and I'm looking forward to having to sharpen less :-) Thanks again!”

John G.

New Zealand

“Nick is the wood-machining genius behind Lake Erie Toolworks, which makes stunning wooden-thread vises. I have installed dozens of his vises on benches and have one on my Roubo. Nick’s wooden screws are the best – better than even the best vintage screws I’ve encountered.”

Christopher Schwarz

https://www.popularwoodworking.com/editors-blog/not-just-another-moxon-vise/

“Howdy. Love the blade I picked up a couple months ago. Best on the market, that’s no BS. I don’t think I’ve used a different blade in my 51 since getting one. When it dulls I sharpen it on the spot over swapping in an A2 because they chip/leave marks on end grain so quickly. It’s crazy how much better these hold an edge.”

Patrick B.

“I'm really enjoying the replacement blade that you sent for my L.N. 102. It cut cherry end grain beautifully. I shall be ordering about 7 or so replacement bench plane blades from your company soon.”

Chris M.

"I don't think it would be physically possible to do cleaner work than what Nick has pulled off. These screws are a work of craftsmanship of the highest order."

Jameel Abraham

“I have received the screws and they are awesome!!! I spend most of my time just winding them in and out.”

Ryan B.

Australia

“I really enjoy the irons, I've tried many different brands for makers of new ones and yours are by far my favorite and the top performers.”

Andrew M.

“Just got the Magnacut sharpened in in my Lie Nielsen 5 1/2. Wonderful blade, I used a Shapton 16000 to get the edge and tertiary bevel. Shavings are thin and transparent from Cedar, walnut and oak. Good job on the metal."

Christopher G.

“Hello Nick, The 2 basic kits I received yesterday are akin to functional art. Material and workmanship are of the highest quality. Until one sees in person what you do, they are missing out on the full experience. I am very pleased and again say a hearty "thanks". I have looked both units over and easily see the quality in your choice of materials, the workmanship, and how they interface. I read the specs and compared your look to the competitions many times before deciding. I really was not prepared for how massive they are and how finely made they are compared to what I expected. All the best for you and your business.”

Rick M

“Hi Nick just wanted to share my thoughts on the blades. Very tough blades. I really appreciate the quality of the grind on the backs. I’ve been using the blade for my LN #4 all week it’s holding up very well. I have a Tormek with a black stone was surprised how fast it cut a hollow. I use Shaptons for cambering my 12k grit yellow finishing stone did have a little trouble cutting. CPM is tough! I found no chipping of the edge so that makes me a happy customer.”

Contact

2X Wood Vise - Basic Kit

Regular price $ 275.00

Testimonials

John G.

“Nick is the wood-machining genius behind Lake Erie Toolworks, which makes stunning wooden-thread vises. I have installed dozens of his vises on benches and have one on my Roubo. Nick’s wooden screws are the best – better than even the best vintage screws I’ve encountered.”

Christopher Schwarz

Patrick B.

“I'm really enjoying the replacement blade that you sent for my L.N. 102. It cut cherry end grain beautifully. I shall be ordering about 7 or so replacement bench plane blades from your company soon.”

Chris M.

"I don't think it would be physically possible to do cleaner work than what Nick has pulled off. These screws are a work of craftsmanship of the highest order."

Jameel Abraham

“I have received the screws and they are awesome!!! I spend most of my time just winding them in and out.”

Ryan B.

“I really enjoy the irons, I've tried many different brands for makers of new ones and yours are by far my favorite and the top performers.”

Andrew M.

“Just got the Magnacut sharpened in in my Lie Nielsen 5 1/2. Wonderful blade, I used a Shapton 16000 to get the edge and tertiary bevel. Shavings are thin and transparent from Cedar, walnut and oak. Good job on the metal."

Christopher G.

Rick M

Andy H

"The best screw I've ever seen. This is it. This is how you clamp wood - It works. Why would you want anything else?"

Frank Klausz

Age verification

Search

Main Menu

Your cart is currently empty.

Let customers speak for us

Contact

2X Wood Vise - Basic Kit

Regular price $ 275.00

Testimonials

John G.

“Nick is the wood-machining genius behind Lake Erie Toolworks, which makes stunning wooden-thread vises. I have installed dozens of his vises on benches and have one on my Roubo. Nick’s wooden screws are the best – better than even the best vintage screws I’ve encountered.”

Christopher Schwarz

Patrick B.

“I'm really enjoying the replacement blade that you sent for my L.N. 102. It cut cherry end grain beautifully. I shall be ordering about 7 or so replacement bench plane blades from your company soon.”

Chris M.

"I don't think it would be physically possible to do cleaner work than what Nick has pulled off. These screws are a work of craftsmanship of the highest order."

Jameel Abraham

“I have received the screws and they are awesome!!! I spend most of my time just winding them in and out.”

Ryan B.

“I really enjoy the irons, I've tried many different brands for makers of new ones and yours are by far my favorite and the top performers.”

Andrew M.

“Just got the Magnacut sharpened in in my Lie Nielsen 5 1/2. Wonderful blade, I used a Shapton 16000 to get the edge and tertiary bevel. Shavings are thin and transparent from Cedar, walnut and oak. Good job on the metal."

Christopher G.

Rick M

Andy H

"The best screw I've ever seen. This is it. This is how you clamp wood - It works. Why would you want anything else?"

Frank Klausz

Never Miss Out

Age verification

Search

Main Menu

Your cart is currently empty.

Let customers speak for us